HIMCOMP Basic

£2,432.23 * (£2,043.89 netto zzgl. MwSt.)

* Prices incl. VAT plus shipping costs

Delivery time 20 Workdays

Housing:

HDD:

Interface Cards:

UPS:

Backup:

Power supply:

  • 02.60.01
Usage With the HI ComP Basic we offer a solution to use industrial PCs in areas where... more
Product information "HIMCOMP Basic"

Usage

With the HI ComP Basic we offer a solution to use industrial PCs in areas where denied normal PC technology.

Numerous requirements for PC systems can not be sufficiently fulfilled by standard PC systems. This problems occurred in the implementation of specific customer requirements in the past. By HIMComP Basic it is possible to individual customer needs in a significantly greater extent than in the originally used systems to accommodate.

The devices of this type are in the world, among others delivered to Russia, Spain and Nicaragua. Much of the equipment was made directly for the GFZ and is used worldwide in stations for earthquake engineering and since early 2006 in the tsunami early warning system. These PCs are stationed in mountain huts, tunnels, tunnels or shafts. The harsh conditions require special requirements. So the PC accordingly to operate robust and independent of the normal power grid. A battery-powered power supply by solar panel, wind power, but also the normal utility power enough. The modular design allows communication with the HIMComP Basic in different ways. In the simplest case via modem, but also via Ethernet, ISDN, wireless modem and satellite link. Of course you can read the data on the spot.

Data acquisition and control

The HIMComP Basic is based on a powerful PC-104 board with power-saving CPU (AMD LX800 ™) and is modular. Thus, a wide variety of interfaces are possible. Data is stored on a 2.5 "hard disk or a flash memory. The power consumption is only 10 watts, the power supply can in a 6 to 40 volts, so that the power under almost all conditions is possible. Due to the very low heat generation the device does not need a fan.

Power supply

  • Default 6-40 VDC battery (with battery replacement, battery life:> 14 days),
  • Solar power operation with built solar charge controller and battery discharge protection,
  • Mains operation with Battery Backup,
  • Cars use the cigarette lighter possible
  • Supply by wind power

Housing

Rugged IP65 protected 4-inch housing

Service

The operation and configuration via an RS232 interface and the preinstalled remote control program.

Measured value processing

The measured values ​​are recorded in HIMcomP Basic through the MDO software, processed and presented in HTML pages using.

The main features of HIMComp Basic are:

  • Full-featured computer
  • IP65 optional IP66
  • Very low power consumption 10W
  • Flexible power supply (battery, solar, wind, cigarette lighter)
  • Variable interfaces

  

 

 Technical specifications

Mainboard

ICOP PC /104

CPU

Vortex 86DX 800MHz

Takt:

800 MHz

Memory:

512MB DDR SDRAM (max. 1GB)

Interfaces:

4x seriell

 

1x parallel

 

2x USB

 

2x LAN 10/100

 

1x PS / 2 keyboard (hidden)

 

1x VGA (hidden)

Hard disk

2,5" 40 GB Flashcard

 

optional 60/80/100 GB)

Flash memomry,

bootfähig

Power supply:

Input voltage 6-40 Volt

power consumption

ca. 10 Watt

 

optional with UPS function

Operating Systems:

Windows , Linux

Gehäuse:

Aluminum housing, front, stainless steel,

 

components are double swinging mounted

Dimension:

170x85x185 mm (W x H x L)

Protection class

IP65 dust / splashproof

Norm - WMO: WMO-No,8 7th Edition Part II Chapter 2 Measurements and observations at aeronautical meteorological stations
Application: Environmental Engineering, Hydrology, Maritime Traffic, Military, Offshore, Research, Transport monitoring, Water Management, Wind energy
Manufacturer: HIM
Resolution (bits): 24
Interfaces: LAN Ethernet, RS232, Rs485, USB, WLAN
Protocols: ASCII, CSV, MODBUS-RTU, PROFIBUS
Memory capacity Hard Drive (s) [GB]: 500
Input Measurement types: seriell
Number of Channels per RS485: 32
Encoder modules: Encoder module Current, Encoder module digital, Encoder module resistance, Encoder module voltage
Extensibility: Yes
Internal sensors Data Logger: Air pressure
External sensors data logger:: Air pressure, Counter, Humidity, Precipitation, Radiation, Temperature, Temperature / Humidity, Wind direction, Wind speed
Degree of protection: IP68
voltage supply: 4..28 VDC
Dimension (cm): 170x85x185 mm (B x H x T)
Weight (Kg): 3,0
Related links to "HIMCOMP Basic"